Toshiba satellite laptop

Tag: Amps

Toshiba PA3467U-1ACA Adapter choosing and Maintenance

by toshibasatellite on Dec.26, 2009, under Toshiba satellite laptop


Toshiba PA3467U-1ACA Adapter   choosing and Maintenance

Before purchasing an Toshiba PA3467U-1ACA Adapter   you need to make sure make the Toshiba PA3467U-1ACA Adapter   will give you the correct voltage and suitable current output. Toshiba Toshiba PA3467U-1ACA Adapter   Use and Maintenance Correct methods of operation are: first AC adapter DC output plug into the notebook’s power jack, and then put into the AC input plug on 220V AC power outlet; and should be unloaded first when the AC input plug unplug, And then pull out the DC output plug. The Voltage must be within 10% of your original Toshiba PA3467U-1ACA Adapter   Voltage. The Amps may be higher but they cannot by lower.If you are purchasing a universal ADP-65HB  Adapter  or Car Charger you will need to work out the Watts of your original Toshiba PA3467U-1ACA Adapter   and select the universal Toshiba PA3467U-1ACA Adapter   or Car Charger with the same Watts or next highest Wattage.

If the plug (unloaded) when reversing the sequence of the adapter will communicate Department unladen state, are not allowed to communicate Department adapter no-load state, for his work on the pulse, and no-load when the switch transformer windings to generate highly anti-peak voltage breakdown, such as IC, capacitor, such as ac adapter voltage-sensitive components. Although the current AC adapter has been set up its no-load protection circuit, but because of the design is required to look up to other problems, such protection circuit protective effect is very limited

To find out the voltage & current, turn your laptop over and look for a label, sticker or writing which shows the voltage and current, it should look something like the examples below.

The voltage figure will have a “V” after the number i.e 19V and the current will have a “A” or “mA”. i.e 3.15A. You can also find these shown on your original Toshiba PA3467U-1ACA Adapter   if you have it. You can work out the Wattage by multiplying the Voltage by the Amps i.e 20V X 3A = 60 Watts. There is no 60 Watt Toshiba PA3467U-1ACA Adapter   so you will need to select the next step up which is the 70 Watt Toshiba PA3467U-1ACA Adapter  . PLEASE NOTE: If the wattage requirement for your laptop is lower than the 60W or 90W output of the adapter, it will not damage your laptop, your laptop will only take the amount of power it requires. I.E.

If your laptop needs 45W, then either the 60W or 90W will work OK. If your laptop needs 80W then you will need the 90W one as the 75W one will not be powerful enough.If in doubt please email us on our contacts page.Once you have selected you Brand and Model from the Search Wizard it will display the compatible Toshiba PA3467U-1ACA Adapter   under the product column. Once you have clicked on the battery you will be redirected to the page displaying alllt he information about the Toshiba PA3467U-1ACA Adapter  . Click on the photo of the Toshiba PA3467U-1ACA Adapter    to enlarge the image and view the tip dimensions to ensure they are similar to your original Toshiba PA3467U-1ACA Adapter   tip dimensions.

Leave a Comment :, , , , more...

How to choose an suitable Toshiba PA3469U-1ACA Adapter

by toshibasatellite on Dec.14, 2009, under Toshiba satellite laptop


How to choose an suitable Toshiba PA3469U-1ACA Adapter.

choose an Toshiba PA3469U-1ACA Adapter with the same electronic specifications as your old one. Make sure its plug size is compatible with the device you plan to use it with. To be sure, bring your device with you before you buy. 

Toshiba PA3469U-1ACA Adapter Specification:

(http://www.babatek.com/pa3469u1aca-toshiba-laptop-ac-power-adapter-75w-p-9466.html)

Input: AC100-240V (worldwide use)

Output: DC15V 5A

Power: 75W

Connecter size: round tip

Internal Diameter: 3.0mm

External Diameter: 6.3mm

Item Includes: AC Adapter and Power Cord.

Toshiba PA3469U-1ACA Adapter Warranty:

Brand New Replacement Product, works as genuine parts, 100% OEM Compatible!!

Full 12 months warranty!

There are some questions for ac adapter.

Question One: Is it OK to use a Dell laptop AC Adapter on a HP laptop?

Question Two: Can I use a universal power adapter to replace my AC Adapter?

Question Three: Can use a 18.5 volt ac adapter on 19 volt laptop?

Question Four: Can I use a higher amp adapter on my laptop?

Suggest a situation that you left you HP adapter home and your friend has a Dell adapter,it plugs and it charges.But at the same time a question following, will it do harm to your laptop or the adapter by doing this? Or what if your friend has a 18.5V AC Adapter with the same brand while yours original is 19V?  And will it be OK if his adapter is with a higer amp?

Maybe you are experiencing this situations now and feeling comfused.Then you must take a while to read the tips below.

Actually,it doesn’t matter whether two AC Adapters are with the same brand,all you need to follow is as bellows:

(1)    The Voltage

 

must be within 10% of your original AC Adapters(Toshiba PA3469U-1ACA Adapter) Voltage.

(2)    The Amps may be higher but they cannot by lower. If higher, no problem, for all electronic products only use as much current(Amps) as thay need but not how much provides.( For example, if the label of your laptop indicates 19V 3.15A, then the AC adapter with the voltage 18V to 19V all works with no harm doing to your laptop, and if you can not find the exact 3.15A AC adapter from these above, just select the next size higher in AMPS.

(3)    Check the connecter of your original AC Adapter(Toshiba PA3469U-1ACA Adapter), and make sure the AC adapter you want to order matches this one.



Leave a Comment :, , , , more...

Toshiba PA3283U-1ACA adapter choosing and Maintenance

by toshibasatellite on Dec.07, 2009, under Toshiba satellite laptop


Toshiba PA3283U-1ACA adapter choosing and Maintenance

Before purchasing an Toshiba PA3283U-1ACA adapter, you need to make sure make the Toshiba PA3283U-1ACA adapter  will give you the correct voltage and suitable current output. The Adapter  Use and Maintenance Correct methods of operation are: first AC adapter DC output plug into the notebook’s power jack, and then put into the AC input plug on 220V AC power outlet; and should be unloaded first when the AC input plug unplug, And then pull out the DC output plug.

The Voltage must be within 10% of your original Toshiba PA3283U-1ACA adapter Voltage. The Amps may be higher but they cannot by lower.If you are purchasing a universal ADP-65HB  Adapter  or Car Charger you will need to work out the Watts of your original Toshiba PA3283U-1ACA adapter    and select the universal Toshiba PA3283U-1ACA adapter  or Car Charger with the same Watts or next highest Wattage.

If the plug (unloaded) when reversing the sequence of the adapter will communicate Department unladen state, are not allowed to communicate Department adapter no-load state, for his work on the pulse, and no-load when the switch transformer windings to generate highly anti-peak voltage breakdown, such as IC, capacitor, such as ac adapter voltage-sensitive components. Although the current AC adapter has been set up its no-load protection circuit, but because of the design is required to look up to other problems, such protection circuit protective effect is very limited

To find out the voltage & current, turn your laptop over and look for a label, sticker or writing which shows the voltage and current, it should look something like the examples below.

The voltage figure will have a “V” after the number i.e 19V and the current will have a “A” or “mA”. i.e 3.15A. You can also find these shown on your original Toshiba PA3283U-1ACA adapter    if you have it. You can work out the Wattage by multiplying the Voltage by the Amps i.e 20V X 3A = 60 Watts. There is no 60 Watt Toshiba PA3283U-1ACA adapter    so you will need to select the next step up which is the 70 Watt Toshiba PA3283U-1ACA adapter   . PLEASE NOTE: If the wattage requirement for your laptop is lower than the 60W or 90W output of the adapter, it will not damage your laptop, your laptop will only take the amount of power it requires. I.E.

If your laptop needs 45W, then either the 60W or 90W will work OK. If your laptop needs 80W then you will need the 90W one as the 75W one will not be powerful enough.If in doubt please email us on our contacts page.Once you have selected you Brand and Model from the Search Wizard it will display the compatible Toshiba PA3283U-1ACA adapter    under the product column. Once you have clicked on the battery you will be redirected to the page displaying alllt he information about the Toshiba PA3283U-1ACA adapter.

Babatek.com, a reliable US computer parts online company, is located in Santa Clara, CA, which maintains a complete inventory of brand new Toshiba PA3283U-1ACA adapter



Leave a Comment :, , , , more...

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!

Visit our friends!

A few highly recommended friends...